Experimental investigations of cutting parameters influence on cutting forces and specific cutting energy in milling of GH4169G

ZHOU Xu; WU Baohai; ZHENG Chengyu; LUO Ming

Chinese︱Feedback︱Save this page

• Elaborating Academic Views 　　　　 • Exchanging Innovative Ideas
• Protecting Intellectual Properties 　　• Fast Sharing Science Papers

Sponsored by the Center for Science and Technology Development of the Ministry of Education
Supervised by Ministry of Education of the People's Republic of China

Home > Papers

Experimental investigations of cutting parameters influence on cutting forces and specific cutting energy in milling of GH4169G

ZHOU Xu 1 #,WU Baohai 1 *,ZHENG Chengyu 2,LUO Ming 1

1.Key Laboratory of Contemporary Design and Integrated Manufacturing Technology (Northwestern Polytechnical University), Ministry of Education, Xi’an 710072

2.No. 8359 Institute of the Third Academy, China Aerospace Science and Industry Corporation, Beijing 100084

*Correspondence author

#Submitted by

Subject:

Funding: 111 Project （No.No. B13044）, Basic Research Foundation of Northwestern Polytechnical University （No.No. JCY20130121）, Research Fund for the Doctoral Program of Higher Education of China （No.No. 20106102120023）

Opened online:31 December 2013

Accepted by: none

Citation: ZHOU Xu,WU Baohai,ZHENG Chengyu.Experimental investigations of cutting parameters influence on cutting forces and specific cutting energy in milling of GH4169G[OL]. [31 December 2013] http://en.paper.edu.cn/en_releasepaper/content/4578306

In this paper study, an attempt has been made to investigate the effects of cutting parameters (cutting speed, feed per tooth, radial depth of cut, axial depth of cut) on cutting forces and specific cutting energy in milling of GH4169G using carbide tool. The single factor experiments and multi-factor orthogonal experiments were conducted. The results show a slight reduction in cutting forces with increasing of cutting speed from 70m/min to 120m/min. The specific cutting energy is almost constant with increasing of cutting speed from 70m/min to 120m/min. The cutting speed has great influence on specific cutting energy in milling GH4169G super alloy. Optimized cutting parameters (cutting speed, feed per tooth, radial depth of cut, axial depth of cut) based on range analysis for milling GH4169G are also given in the paper, the results can be directly used in industry.

Keywords:Milling; Cutting force; Cutting parameters; Specific cutting energy

For this paper

● PDF (0B)
● Revision 0 　　
● Print this paper
● Recommend this paper to a friend
● Add to my favorite list

Saved Papers

Please enter a name for this paper to be shown in your personalized Saved Papers list

Tags

Add yours

Related Papers

Statistics

PDF Downloaded	219
Bookmarked	0
Recommend	5
Comments	Array

Submit your papers

Alert Name:
Alerting to:
Authentication email will be sent to your email address in 24 hours
Frequency:
Email Message Format:	Plain text Graphical(HTML)

Complete the form below and we will recommend the selected titles to your friends on your behalf. * Indicates a required field.
Your name*:
Your email address*:
Recipient's name*:
Recipient's email address*:
(multiple recipient's names and email addresses should be separated with semicolons)
Your comments:	I thought you would find the page(s) useful.

Your name:
Your email address:
Recipient's name:
Recipient's email address:
(multiple recipient's names and email addresses should be separated with semicolons)
Your comments:	I thought you would find this page useful.

Disclaimer: This message was sent to your friend using the "Send it to a friend" facility on the Sciencepaper Online’ WWW site, http://www.paper.edu.cn/en. The Sciencepaper Online is not responsible for the content of this email, and anything said in this email does not necessarily reflect the Sciencepaper Online's views.

	Check out RSS, or use RSS reader to subscribe this item

Saved Papers