Check out RSS, or use RSS reader to subscribe this item
Confirmation
Authentication email has already been sent, please check your email box: and activate it as soon as possible.
You can login to My Profile and manage your email alerts.
Sponsored by the Center for Science and Technology Development of the Ministry of Education
Supervised by Ministry of Education of the People's Republic of China
Fabrication experiments of porous composite-bonded CBN wheels are conducted using alumina (Al2O3) bubbles, CBN grains, Cu-Sn-Ti alloy and graphite particles. Influence of sintering parameters and porosity on the bending strength of the CBN composite blocks is measured and analyzed. Dressing and grinding practice is carried out. The results show that the optimal sintering temperature of the CBN composite blocks is 880℃. When the porosity of composite blocks is 8-45 %, the strength reaches 51-103 MPa. Regular shape of the pores is obtained after dressing. Both the grinding force and grinding temperature of the composite-bonded CBN wheel are lower than that of the vitrified one under the same grinding condition, which indicates the better grinding performance of the new-type porous composite-bonded CBN wheel.