Abstract:A new set of multiresolution curvilinear Rao-Wilton-Glisson (MR-CRWG) basis functions is proposed for the method of moments (MoM) solution of integral equations for three-dimensional (3-D) electromagnetic (EM) problems. The MR-CRWG basis functions are constructed as linear combinations of curvilinear Rao-Wilton-Glisson (CRWG) basis functions which are defined over curvilinear triangular patches, thus allowing direct application on the existing MoM codes that using CRWG basis. The multiresolution property of the MR-CRWG basis can lead to the fast convergence of iterative solvers merely by a simple diagonal preconditioning to the corresponding MoM matrices. Moreover, the convergence of iterative solvers can be further improved by introducing a perturbation from the principle value term of the magnetic field integral equation (MFIE) operator to construct diagonal preconditioners for efficient iterative solution of the electric field integral equation (EFIE). Another important property of the MR-CRWG basis is that the MoM matrices using the MR-CRWG basis can be highly sparsified without losing accuracy. The MR-CRWG basis has been applied to the 3D electromagnetic scattering problems successfully. The numerical results indicate that the MR-CRWG basis performs better than the CRWG basis.

Alert Name:
Alerting to:
Authentication email will be sent to your email address in 24 hours
Frequency:
Email Message Format:	Plain text Graphical(HTML)

Complete the form below and we will recommend the selected titles to your friends on your behalf. * Indicates a required field.
Your name*:
Your email address*:
Recipient's name*:
Recipient's email address*:
(multiple recipient's names and email addresses should be separated with semicolons)
Your comments:	I thought you would find the page(s) useful.

Your name:
Your email address:
Recipient's name:
Recipient's email address:
(multiple recipient's names and email addresses should be separated with semicolons)
Your comments:	I thought you would find this page useful.

Disclaimer: This message was sent to your friend using the "Send it to a friend" facility on the Sciencepaper Online’ WWW site, http://www.paper.edu.cn/en. The Sciencepaper Online is not responsible for the content of this email, and anything said in this email does not necessarily reflect the Sciencepaper Online's views.


	1. A Novel Multiresolution Curvilinear Rao-Wilton-Glisson Basis Function for the Method of Moments
	J. J. Ding,D. Z. Ding,R. S. Chen
	Electrics, Communication and Autocontrol Technology 28 December 2007
	Show/Hide Abstract \| Cite this paper︱Full-text: PDF (0 B)

	Abstract:A new set of multiresolution curvilinear Rao-Wilton-Glisson (MR-CRWG) basis functions is proposed for the method of moments (MoM) solution of integral equations for three-dimensional (3-D) electromagnetic (EM) problems. The MR-CRWG basis functions are constructed as linear combinations of curvilinear Rao-Wilton-Glisson (CRWG) basis functions which are defined over curvilinear triangular patches, thus allowing direct application on the existing MoM codes that using CRWG basis. The multiresolution property of the MR-CRWG basis can lead to the fast convergence of iterative solvers merely by a simple diagonal preconditioning to the corresponding MoM matrices. Moreover, the convergence of iterative solvers can be further improved by introducing a perturbation from the principle value term of the magnetic field integral equation (MFIE) operator to construct diagonal preconditioners for efficient iterative solution of the electric field integral equation (EFIE). Another important property of the MR-CRWG basis is that the MoM matrices using the MR-CRWG basis can be highly sparsified without losing accuracy. The MR-CRWG basis has been applied to the 3D electromagnetic scattering problems successfully. The numerical results indicate that the MR-CRWG basis performs better than the CRWG basis.
	TO cite this article:J. J. Ding,D. Z. Ding,R. S. Chen. A Novel Multiresolution Curvilinear Rao-Wilton-Glisson Basis Function for the Method of Moments[OL].[28 December 2007] http://en.paper.edu.cn/en_releasepaper/content/17507


	2. Shifted SSOR Preconditioning Technique for Electromagnetic
	J.Q. Chen,R.S. Chen
	Electrics, Communication and Autocontrol Technology 27 December 2007
	Show/Hide Abstract \| Cite this paper︱Full-text: PDF (0 B)

	Abstract:To efficiently solve large dense complex linear arising from electric field integral equations (EFIE) formulation of electromagnetic scattering problems, the multilevel fast multipole method (MLFMM) is used to accelerate the matrix-vector product operations. The symmetric successive over-relaxation (SSOR) preconditioner is constructed based on the near-field matrix of the EFIE and employed to speed up the convergence rate of iterative methods. This technique can be greatly improved by shifting the near-field matrix of the EFIE with the principle value term of the magnetic field integral equation (MFIE) operator. By comparison with other preconditioning techniques, numerical results demonstrate that the present method can reduce both the number of iterations and the computational time significantly with low cost for construction and implementation of preconditioners.
	TO cite this article:J.Q. Chen,R.S. Chen. Shifted SSOR Preconditioning Technique for Electromagnetic[OL].[27 December 2007] http://en.paper.edu.cn/en_releasepaper/content/17440

Saved Papers

Saved Papers


	3. Fast and accurate simulations of transmission-line metamaterials using transmission-matrix method
	Huifeng Ma,Tiejun Cui,Yao Qin,Qiang Cheng
	Electrics, Communication and Autocontrol Technology 25 December 2007
	Show/Hide Abstract \| Cite this paper︱Full-text: PDF (0 B)

	Abstract:Recently, two-dimensional (2D) periodically L and C loaded transmission-line (TL) networks have been applied to represent metamaterials. The commercial Agilent’s Advanced Design System (ADS) is a commonly-used tool to simulate the TL metamaterials. However, it takes a lot of time to set up the TL network and perform numerical simulations using ADS, making the metamaterial analysis inefficient, especially for large-scale TL networks. In this paper, we propose transmission-matrix method (TMM) to simulate and analyze the TL-network metamaterials efficiently. Compared to the ADS commercial software, TMM provides nearly the same simulation results for the same networks. However, the model-process and simulation time has been greatly reduced. The proposed TMM can serve as an efficient tool to study the TL-network metamaterials.
	TO cite this article:Huifeng Ma,Tiejun Cui,Yao Qin, et al. Fast and accurate simulations of transmission-line metamaterials using transmission-matrix method[OL].[25 December 2007] http://en.paper.edu.cn/en_releasepaper/content/17364


	4. The Design of USB Video Device Based on UVC
	Li Zhenhua ,Jiang Wei
	Electrics, Communication and Autocontrol Technology 25 December 2007
	Show/Hide Abstract \| Cite this paper︱Full-text: PDF (0 B)

	Abstract:The abroad usage of USB (Universal Serial Bus) Video device and enhancement has become increasingly important nowadays, such as video conferencing based on networks and the inspection usage in industry. Recent technological advances, such as the widely use of CCD and CMOS sensors, promotes the development of USB Video device. We describe a UVC based approach for designing a desktop video device comprised of firmware and software .Our approach is particularly attractive for those video and audio device exploiters who haven’t had any experience in driver development area. In our solution approach , we first configure the USB chip compliant to the UVC specification 1.1 , then we send video stream data through Input Terminal which is located at the video functionality topology by means of sending a fixed pattern via personal computers or configuring USB chip in Slave-FIFO mode to transfer the real video or image data .Windows system would recognize this video device automatically after bus enumeration and then search the proper driver in our system which is used for setup and making the hardware work and communicate with our personal computers properly.
	TO cite this article:Li Zhenhua ,Jiang Wei . The Design of USB Video Device Based on UVC[OL].[25 December 2007] http://en.paper.edu.cn/en_releasepaper/content/17334


	5. Interfacial Reaction Induced PBTI and NBTI Characteristics in the HfN/HfO2 Gate Stacks with Low Preexisting Trap Density
	Sa Ning ,Yang Hong ,Kang Jinfeng
	Electrics, Communication and Autocontrol Technology 24 December 2007
	Show/Hide Abstract \| Cite this paper︱Full-text: PDF (0 B)

	Abstract:In this paper, HfN/HfO2 gated n-FETs and p-FETs with low preexisting traps density in the HfN/HfO2 gate stacks were fabricated by using a high temperature process. The positive and negative bias temperature instability (PBTI and NBTI) characteristics in the HfN/HfO2 gate stacks are studied systematically. The characteristics of the Vt instability mainly caused by the stress-polarity instead of the substrate type -dependent are observed both in n-FETs and p-FETs. The negative threshold voltage (Vt) shifts, which can be well fitted by a generalized reaction-diffusion (R-D) model, are observed under both positive and negative bias temperature (NBT) stressing. The mechanisms of the interfacial reactions induced by the injected electrons or holes from substrates are proposed to explain the observed PBTI and NBTI characteristics: under PBT stressing, the injected electrons from the substrates induce the breaking of the Si-O bonds in the interfacial layer between HfO2 layer and Si substrates, which causes the PBTI characteristics; under NBT stressing, the injected holes from the substrate induce the breaking of the Si-H bonds at Si interface, which causes the NBTI characteristics. The consistency between the measured data and the ones predicted by the mechanisms confirms the validity of the interfacial reactions mechanisms.
	TO cite this article:Sa Ning ,Yang Hong ,Kang Jinfeng . Interfacial Reaction Induced PBTI and NBTI Characteristics in the HfN/HfO2 Gate Stacks with Low Preexisting Trap Density[OL].[24 December 2007] http://en.paper.edu.cn/en_releasepaper/content/17305


	6. Modeling and Control of Knowledgeable Manufacturing Cell Based on Matrix-Automata
	Yan HongSen,Dong Hao
	Electrics, Communication and Autocontrol Technology 22 December 2007
	Show/Hide Abstract \| Cite this paper︱Full-text: PDF (0 B)

	Abstract:The running of the knowledgeable manufacturing cell (KMC) is a typical discrete event dynamic process. Methods used to model and analyze discrete event dynamic systems (DEDS) include Petri net and automata theory. In this paper, a new matrix-automaton is proposed to model the KMC and solve the task control problems existing in the KMC. The automaton is of structured property and can be used to analyze the dynamic performance of the KMC. The stochastic dynamic programming is applied to derive the optimal task control strategy of the automaton. The matrix-automaton model of an experimental KMC including m manufacturing agents and n classes of workpieces is built and solved by the methods presented in this paper. Its objective function value testifies the validity and feasibility of the control strategy.
	TO cite this article:Yan HongSen,Dong Hao. Modeling and Control of Knowledgeable Manufacturing Cell Based on Matrix-Automata[OL].[22 December 2007] http://en.paper.edu.cn/en_releasepaper/content/17262


	7. Simulation of Transmitting Square Waveform Signals through Bandwidth Limited Channel Using Matlab/Simulink
	Sun Peng
	Electrics, Communication and Autocontrol Technology 20 December 2007
	Show/Hide Abstract \| Cite this paper︱Full-text: PDF (0 B)

	Abstract:Theory of transmitting a sequence of square signal through bandwidth limited channel is given. The process is simulated in Matlab/Simulink with clearly-stated pre-assumptions. Simulation results are present to show that reconstructed signal after the square wave passing through the channel will distort and some frequency limitation must be satisfied to avoid inter symbol interference.
	TO cite this article:Sun Peng. Simulation of Transmitting Square Waveform Signals through Bandwidth Limited Channel Using Matlab/Simulink[OL].[20 December 2007] http://en.paper.edu.cn/en_releasepaper/content/17181


	8. Wireless HDMI implementation architecture based on JPEG2000
	Li Lin
	Electrics, Communication and Autocontrol Technology 20 November 2007
	Show/Hide Abstract \| Cite this paper︱Full-text: PDF (0 B)

	Abstract:this paper gives latest insight of the current hotpot in Home Consumer Electronics, i.e., wireless HD, and analyzes the key technologies that should be employed in such application. A proposed architecture based on JPEG2000 in wireless HDMI is suggested based on ADI’s latest product ADV126.
	TO cite this article:Li Lin . Wireless HDMI implementation architecture based on JPEG2000[OL].[20 November 2007] http://en.paper.edu.cn/en_releasepaper/content/16457


	9. Sphere-Decoding of Signals With ISI
	Yu Ke
	Electrics, Communication and Autocontrol Technology 13 November 2007
	Show/Hide Abstract \| Cite this paper︱Full-text: PDF (0 B)

	Abstract:Sphere-Decoding is a newly developed fast MLSD (Maximum Likelyhood Sequence Decoding) algorithm commonly used in MIMO (Multiple Input and Multiple Output) System. In this paper, signal sequences with ISI (Intersymbol Interference) is decoded using Sphere-Decoding. The algorithm is modified according to ISI channel with the BER (Bit Error Ratio) simulation results and expected complexity analysis given.
	TO cite this article:Yu Ke. Sphere-Decoding of Signals With ISI[OL].[13 November 2007] http://en.paper.edu.cn/en_releasepaper/content/16311


	10. Using another feature selection algorithm for POS Tagging based on Maximum Entropy Principle
	Yao Ning
	Electrics, Communication and Autocontrol Technology 09 November 2007
	Show/Hide Abstract \| Cite this paper︱Full-text: PDF (0 B)

	Abstract:Maximum Entropy model is widely used in natural language processing in many fields, this paper uses Maximum Entropy model to build a part-of-speech tagging system based on the special needs. Because of the huge difference of grammar and structure between Chinese and English, this paper focuses on feature selection’s influence on the premise that its feature template is selected. And we use a feature selection algorithm-iteration, modification, and cutting (IMC) applied to Maximum Entropy model. The experiment shows that we can gain a better result through appropriate feature selection methods.
	TO cite this article:Yao Ning. Using another feature selection algorithm for POS Tagging based on Maximum Entropy Principle[OL].[ 9 November 2007] http://en.paper.edu.cn/en_releasepaper/content/16257

	Check out RSS, or use RSS reader to subscribe this item